Product Instructions

1.Frequency: Support 433.8MHz、125KHz receive.

2. Operating voltage: VDC.3.7

3. Working temperature and humidity :5℃-40℃,0-90% RH.

4. Atmospheric pressure: hPa-1060hPa 860

5. Size: length*width*high =33 mm*28.2mm*12.3mm

6. Equipment battery capacity :3.7 VDC,30mAh.

IV. USE OF PRODUCT INSTALMENT

This product use is the need to combine with the baby anti-theft system of other

equipment, before use need to use the wristband across the two sides of the Baby Tag

anti-pull hole as shown in figure 2,3, so that it starts to work. Both ends of the

wristband PE built-in resin sheet for easy wear.

Fig.2 The wristband passes through the Baby Tag

Fig .3 Baby tags worn on baby feet

After wearing, enter the unique ID address on the Baby Tag into the baby

anti-theft system software, so that the label is added to the protective system. The baby

label has a fixed heartbeat signal sent, the heartbeat signal received through the reader

and then transmitted to the service system software, you can detect whether the baby

label is online.

1. Exit alarm function: when the baby bound with Baby Tag is illegally taken to

the exit, the exit will send out acousto-optic alarm, and the software will also have

alarm warning.

2. Wristband cut alarm function: when the wristband of Baby Tag is broken by

illegal cut, the label will send out the cut alarm signal, and the system software

terminal will send out the alarm message and prompt sound.

3. Positioning function: the Baby Tag automatically sends the positioning signal