User's Manual

1. Product Briefly introduction

Boundary manager is mainly used for the exit management alarm of personnel and

asset locate system. And it will send positioning frequency of 125KHZ which is a kind

of low-frequency signal. When someone and assets pass through the exit without

permission, the exit will send an alarm message and upload it to the server. The front

side of the boundary manager show in Figure1.

Figure1 The front side of the boundary manager

Figure2 Wiring diagram of Boundary manager

2. Specifications

1. Working Frequency: 433MHz

2. Signal modulation method: GFSK

3. Receiving sensitivity: -100dBm

4. Monitoring distance: 2m ～ 5m

5. Atmospheric pressure: 86KPa-106KPa

6. Working temperature: -10 ℃ ～ + 85 ℃

7. Working humidity: 10% ～ 90% RH without condensation

8. Power supply mode: POE power supply 48VDC / DC12V

9. Size: length * width * height = 187mm * 187mm * 31mm

Sound and

light,access

control system

DC Power supply

interface

Network

interface

Positioning distance

adjustment interface