Boundary Manager User manual Enjoyor,.CO.LTD Zhejiang Zhier Information Technology Co., Ltd. Version： Manual Vision 2.
Table of Contents 1. Product Briefly introduction ............................................................................ 1 2. Specifications .......................................................................................................... 1 3. Installation ............................................................................................................... 2 4. Instructions .............................................................................................................
Dear customer: Hello! Thanks for choosing Enjoyor technology products and services. To ensure your satisfied use, please read the user manual carefully before using this product, And please keep the manual properly for future reference. Whenever you need our service and support, Please be freely to let us know. Before using This product Must be used by medical personnel who had received training by the manufacturer.
1. Product Briefly introduction Boundary manager is mainly used for the exit management alarm of personnel and asset locate system. And it will send positioning frequency of 125KHZ which is a kind of low-frequency signal. When someone and assets pass through the exit without permission, the exit will send an alarm message and upload it to the server. The front side of the boundary manager show in Figure1.
3. Installation The positioning hole distance of the boundary manager is rectangular 82mmx141mm. The boundary manager is powered by POE. If POE is used, the communication gateway needs to support the POE function. The boundary manager needs to test the communication distance to determine the ideal installation position. It can also be installed against the wall. Notice that there must be no metal shields around the installation, otherwise it will affect the wireless reception effect.
. Storage and transportation 1.Avoid splashing rain and direct sunlight. 2. Storage temperature (-40 ℃ -80 ℃), relative humidity (5% -95%). 3. Avoid corrosive gas or salty air. 4. Avoid strong electric or magnetic fields. 5. There is no strong vibration and impact in the storage place. 6. The packing box is greater than 10cm from the ground and 50cm from the wall. 7. Basic Troubleshooting Table1 Basic troubleshooting SN 1 Problem Solution Boundary manager indicator does not light 1.
CE Caution: Use the Product in the environment with the temperature Between -10℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment: Product Name: Border Manager Brand Name: -Model No.: E-RL100 Zhejiang Zhier Information Technology Co., Ltd. E-mail: qiliping@enjoyor.net This product is intended for sale and application in a business environment.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
