User's Manual
6
Figure4, Infusion Monitor usage flowchart
8. Precautions
1.Waterproof,anti‐fall,lightlyhandle.
2.Whentheinfusionmonitorisnotinuse,pressandholdthebuttontoshutdownto
enterthelowpowerconsumptionmode.
3.Iftheequipmentbatteryisnotreplaceableandthebatterycannotbechargedor
used, please do not disassemble it privately, contact our after‐sales service for
disposal.
4. It is recommended not to discard the equipment that cannot be used and put it
together,pleasecontactourcompanyfordisposal.
5.Theuseperiodofthisproductanditsaccessoriesis3years.Afterexpiration,itwill
be recycled by the corresponding professional scrap electronic product recycling
agency(enterprise).
6.Itisnotsuitablefortheinputofliquidmedicinewithhighviscosity.
5. Hang the barb of the
infusiontubeupsidedownin
thehookholeoftheinfusion
monitor
4. Press the power button
tostarttheinfusion
monitor.
The display will show the
status
3. Turn on the left infusion
cover,Lightlypressthedropper
into the corresponding groove.
(The drip irrigation controller
detects the liquid through the
sensor‐‐‐‐‐‐‐LEDindicatoralways
beingGreen.)
Display status‐‐Liquid deficit
showing “‐‐‐‐”
2. Turnofftheleftinfusion
cover, adjust the infusion
rate. The left infusion
controller will monitor the
drop rate and send to the
right side display through
infrared,infusionstart.
The display status‐‐ it will
display the drop rate when
1. Whentheleftdrop
controller didn’t detect
liquid ( LED indicator light
off). The alarm will be
triggered after finish the
infusion. The shrapnel on
theupperrightsideofthe
groove ejects the stuck
dropper to prevent blood
fromflowingback