User's Manual

5
monitor.Theinfusionmonitorwillautomaticallydetectthedriprate. 
4.Whenthebatterylevelonthedeviceislow,youneedtoconnect the charger to
charge. During charging, LED1(yellow) will blinkcontinuously until the LED1 light is
alwaysonwhichmeanschargecompleted.LED2istheworkindicatorlight.
5.Whentheinfusioniscompletedandthebottleisempty,theclampoftheinfusion
monitor will automatically catch the infusion tube, effectively preventing the back
flowofbloodfromthepatient.Whenyouneedtoremovetheinfusiontube,youonly
need to press a button on the panel, the clip is to release thestuckinfusiontube.
Whenyoudonotneedtouseit,youhavetopressandholdthebuttontomakethe
infusionmonitorinthesleepstate.
TheLEDindicatorisshowninFigure3.


Figure3,TheindicatorofInfusionmonitor