User's Guide



Item Description

Model YGA03C17-8.5W-A19-2700K/6500K-Smart

Function On/Off/Dimmable/ CCT adjustable / Bluetooth control

Power 8.5W

Voltage (v) 120

Power Factor (w) 0.5

Luminous Flux (lm) 800

CCT(k) 2700K/6500K

CRI 80

Beam Angle 200

Diameter (mm) φ60

Life (h) 10000

Control Distance(m) 15

UserGuide

1. InstallthesmartbulbintoapowerOFFlightsocket.

2. Download the Energetic Lighting App from the APP Store or from Google Play. Create an

accountandenterintotheAPP.

3. Turn on the Bluetooth on the phone. Tap “+” in the top‐right corner of the app

 and then

select“searchdevice”.

4. Powerupthesmartbulb.

5. Thebulbwillappearintheapp.Taptheiconandwaituntilitisaddedsuccessfully..

6. Youcanturnonoroffthebulb,andadjustitsbrightnessandCCTusingtheapp.

7. Ifthe

bulbisswitchedoff,itcannotbecontrolledbyapp.



FCCWarning

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

PAGE 1
Item Model Function Power Voltage (v) Power Factor (w) Luminous Flux (lm) CCT(k) CRI Beam Angle Diameter (mm) Life (h) Description YGA03C17-8.5W-A19-2700K/6500K-Smart On/Off/Dimmable/ CCT adjustable / Bluetooth control 8.5W 120 0.5 800 2700K/6500K 80 200 φ60 10000 Control Distance(m) 15 User Guide 1. Install the smart bulb into a power OFF light socket. 2. Download the Energetic Lighting App from the APP Store or from Google Play. Create an account and enter into the APP. 3.
PAGE 2
—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. ISEDC RSS warning This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s).