Manualshelf

User's Manual

ManualsBrandsZhejiang Xingyu Mechanical & Electrical Technology ManualsGeneratorsPORTABLE POWER STATION
891011121314151617
NOTICE
When the product is charging, if you need to use the product output function while charging,
when the output power is less than the charging power, the product will slowly fill up according
to the internal battery cell capacity, if the output power is greater than the charging power, the
product will slowly drain the internal battery Capacity, can be used normally after full.
The product has 2 charging ports, the 5mm adapter charging port on the left side of the air outlet and the
fast charging port on the right side of the air outlet. The 5mm adapter charging port supports 19V/5A
adapter charging, and the fast charging port supports 19V/ 25A fast charge (fast charging adapter needs
to be purchased separately). When charging in any way, the LCD display will light up, and the charging
symbol will be displayed at the same time, the battery icon will be scrolled, the power bar will display the
charging power, and the remaining time bar will display the full charge remaining time.
Adapter charging
Plug the AC input plug of the adapter into the socket connected to the power grid, and then plug the DC
output plug of the adapter into the 5mm adapter charging port. The LCD screen lights up, and the
charging icon is displayed. The battery icon is scrolled and displayed, and the charging power and full
time remaining.
Fast charging
Plug the AC input plug of the fast charge charger into the socket connected to the power grid, and then
plug the fast charge DC output plug into the fast charge charging port. The LCD screen lights up, the
charging icon is displayed, the battery icon scrolls, and the charging power and remaining time are
displayed at the same time.
Cooling system
This product is designed with an intelligent cooling system, which can monitor the internal temperature of
the product in real time, and intelligently adjust the speed of the cooling fan according to the
temperature.
WARNING
The cooling air inlet of this product is designed at the bottom of the product. It should be
placed in a flat place and there is no debris around it to prevent the air inlet from being
blocked.
It is strictly forbidden to cover or obstruct the cooling vent of the product and ensure that at
least 5cm of space around the power supply is unobstructed.