User's Manual

Use of product
Power output
This product has 3 output zones, AC output, DC output and USB output. Each area has a corresponding
button to turn on and off all the interface functions of the corresponding area output. When you press any
one of the control buttons in the “OFF” state, the device will turn on, the display will light up and show the
real-time data, and at the same time, turn on all the interface function outputs in the area corresponding
to the button you pressed, the button will light up. When the unit is on, if you want to turn on the outputs
for other zones, simply tap the corresponding zone button. If you need to turn off the output, just click the
corresponding area button to turn it off. When all areas are closed, the display will go out and the system
will enter the shutdown state.
NOTICE
 Check the power of the load to ensure that it does not exceed the rated output power of the
power supply. If it exceeds, please choose a portable energy storage power supply with higher
power.
 If the load exceeds the maximum output power of this product, the protection function will be
triggered, and the output will be shut off immediately.
AC output
Press the AC output switch button to turn on the AC output, the display will light up and display real-time
data, the light on the button will light up, and the AC output socket can be used at this time. Press the AC
output switch button again, the AC output function will be turned off.
DC output
Press the DC output switch button to turn on the DC output, the display will light up and display real-time
data, the light on the button will light up, and the cigarette lighter output socket can be used at this time.
Press the DC output switch button again, the DC output function will be shut down.
USB output
Press the USB output switch button to turn on the USB output, the display will light up and display
real-time data, and the light on the button will light up. At this time, the USB output socket, Type-C output
socket and wireless charging output can be used. Click the USB output again Switch button, USB output
function will be turned off.
Charging the power station
This product has a charging protection function. It is used in accordance with normal charging operations.
After the product is fully charged, it will automatically stop charging. To avoid other accidents, it is
recommended that the product is fully charged and disconnected in time.