Power Station User Manual (XGH360/XGH720/XGH1000) Zhejiang Xingyu Mechanical & Electrical Technology Co., Ltd.
Forewords Thank you for choosing our power station. All contents of this manual are consistent with the latest products (when this manual is printed). Our company reserves the right to make changes without notice and without any liability. This manual is owned by our company and is not allowed to be recorded without written permission.
Production introduction This product is a portable multi-functional energy storage power station, with built-in imported lithium-ion battery, safe lithium battery management system (BMS), and efficient energy conversion circuit. It has the features of small size, large capacity, light weight, high power, easy to carry, etc., and providing you with a simple mobile power solution.
Safe Operation WARNING If you operate the power station in accordance with the operating manual, it will operate as designed, safely and reliably. Please read and understand these instructions carefully before operating the power station, otherwise personal injury or equipment may result. WARNING There may be high voltage inside the power supply system, please do not open the power supply system without our company or our authorized technician, otherwise there is a risk of electric shock.
NOTICE This product is a power supply. Select the model that corresponds to the electrical equipment. Do not use this product with excessive power or load. When the power is exhausted, it should be charged in time. There are two wires at the output of DC power supply. Please make sure the positive and negative terminals are not reversed before connecting the DC power supply output terminal to the appliance, otherwise the circuit will be damaged.
Technical parameters Parameters XGH360 XGH720 Battery type Battery XGH1000 lithium ion battery Battery power 360Wh 720Wh 1300Wh Battery capacity 100000mAh 200000mAh 360000mAh Battery voltage 14.8V 14.8V 14.
Standby power Operating temperature Quiescent current <100uA Charging temperature 0~40℃ Discharging temperature -20~40℃ Store temperature Product weight Product volume -20~40℃ Net weight 4.6 Kg 7.5 Kg 12.5 Kg Gross weight 5.6 Kg 8.5 Kg 13.
Product illustrations Machine diagram Handle Control panel Adapter input Fast charging input Fan Wireless charging output Car starting output
Control panel LCD screen AC Socket USB output Type-C output USB switch DC switch AC switch Cigarette lighter output
Display screen 4 1 5 6 2 7 3 # Name 1 Power icon 2 Charging icon Function Battery level display, scrolls while charging. Illuminates when charging, indicating charging status. 3 Remaining battery Displays battery charge by percentage, 0%-100%. 4 AC output voltage Digits + V combination, AC output voltage display. 5 Fault code 6 Total power used 7 Remaining time Digits + Err combination to display fault codes.
Use of product Power output This product has 3 output zones, AC output, DC output and USB output. Each area has a corresponding button to turn on and off all the interface functions of the corresponding area output. When you press any one of the control buttons in the “OFF” state, the device will turn on, the display will light up and show the real-time data, and at the same time, turn on all the interface function outputs in the area corresponding to the button you pressed, the button will light up.
NOTICE When the product is charging, if you need to use the product output function while charging, when the output power is less than the charging power, the product will slowly fill up according to the internal battery cell capacity, if the output power is greater than the charging power, the product will slowly drain the internal battery Capacity, can be used normally after full.
Product Storage The product should be stored in a clean, dry and ventilated room with an ambient temperature of -20~40℃. Avoid contact with corrosive substances and keep away from fire and heat sources. The battery should be in a half-charged state of about 50%. To prevent the battery is over-discharged due to self-consumption. It is best to charge and discharge the battery once every 3 months during storage.
Trouble shooting Trouble shooting # 1 2 3 4 Failure phenomenon Solution There is no response when the product is turned on, and there is no output from AC, DC, or USB 1. Remove the product load, then charge it for 5-10 minutes, then restart. 2. Make sure that the product is currently in the normal temperature range. The product can be turned on, but there is no output for the output interface 1. Check whether the battery power is too low, if so, please charge it in time. 2.
Fault code # Fault code Fault 1 E-11 USB overload protection 2 E-12 USB short circuit protection Disconnect output immediately 3 E-13 USB failsafe Disconnect output immediately 4 E-21 DC overload protection ＞13A，0.5s warning, disconnect output after 10s delay E-22 DC reverse connection/ short circuit protection 5 Fault description Disconnect output after 10s delay Disconnect output immediately More than 10% of rated power, 0.
After-sale service Warranty If the product fails, please follow the instructions. If the failure still cannot be eliminated, please contact our company's after-sales service personnel. When contacting the after-sales service, please provide the following information: product model, purchase date, contact number, detailed address, product failure description.
Spare parts list FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
