User's Manual

English - 13
English - 12
SELF DIAGNOSIS
SPECIFICATIONS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen is No
Signal, Out of range or None support .
No Signal screen is displayed when the D-
Sub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
None support screen is displayed when the
applied frequency is under or over factory
preset timings.
Check cable screen is displayed when the
signal cable is disconnected.
Panel Size 19-inch diagonal
Pixel Pitch 0.098(H)mm x 0.294(V)mm
Viewing Angle 85°(Right/Left)
85°(up/down)
Contrast Ratio 500:1 contrast ratio (typ)
Brightness 250cd/m
2
brightness (typ)
Color Filter RGB vertical stripe
Synchronization Horizontal 30 - 80KHz
Vertical 56 - 77Hz
Video Bandwidth 135MHz
Max Resolution 1280 x 1024 75Hz
Colors 16M Colors
Display Area 376.32(H)mm x 301.056(V)mm
PC Input Signal Sync H/V separate (TTL)
Video 15 pin mini D-sub(Analog RGB)
AV Input Signal Video CVBS(RCA), S-Video(Mini-DIN)
Audio RCA Left+Right Input
Stereo Mini Jack Input & Output
Speaker Max. Output 2W(Left 1W+Right 1W)
Plug and Play VESA DDC Compatible
Power Source 100-240Vac, 50/60Hz (Free Voltage)
Power Consumption 40W
Dimension-W x H x D 418.5 x 435.4 x 263mm (with stand)
418.5 x 364.5 x 70.8mm (without stand)
Weight-net/gross 7.6/9.2Kg(16.7/20.3lbs)
Power Saving EPA, VESA DPMS, Nutek Compliant
Tilt Range 5° forward, 30° backward
Operating Temperature 10 ~ 40°C /50 ~ 104°F
a
The specification can be changed without any prior notice to improve the quality
of the product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due
to a characteristic of the LCD panel. But there is no defect in your LCD product
itself.
1
2
3
4