User's Manual

English - 11
SPECIFICA
SPECIFICA
TIONS
TIONS
English - 10
SELF DIAGNOSIS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the D-
Sub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 62 KHz
V : 50 - 75 Hz
None support screen is displayed when the
applied frequency is under or over factory
preset timings.
Check cable screen is displayed when the
signal cable is disconnected.
Panel Size 15 inch(38cm) diagonal
Pixel Pitch 0.297 x 0.297 mm
Viewing Angle 65°(Right/Left)
55°(up), 55°(down)
Contrast Ratio 400:1 contrast ratio(typ)
Brightness 250cd/m
2
brightness(typ)
Color Filter RGB vertical stripe
Synchronization Horizontal 30 - 62 KHz
Vertical 50 - 75 Hz
Video Bandwidth 80MHz
Max Resolution 1024 x 768@75Hz
Optimal Resolution 1024 x 768@60Hz
Colors 16.2M Colors
Display Area 304.1 mm x 228.1 mm
PC Input Signal Sync H/V separate(TTL)
Video 15 pin mini D-sub(Analog RGB)
Plug and Play VESA DDC Compatible
Power Source 100-240Vac, 50/60Hz(Free Voltage)
Power Consumption 26W
Dimension-W x H x D 350.8 x 375.4 x 172.8mm(with stand)
350.8 x 296.7 x 59.5mm(without stand)
Weight-net/gross 5.3/ 7.0 Kg (11.7/15.4 Lbs)
Power Saving EPA, VESA DPMS, Nutek Compliant
Tilt Range 5° forward, 30° backward
Operating Temperature 10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the quality of the
product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a
characteristic of the LCD panel. But there is no defect in your LCD product itself.