User's Manual

English - 8
OPERATION & ADJUSTMENT
English - 9
SPECIFICATIONS
Display horizontal & vertical frequency
and polarity.
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
DEGAUSS
STATUS
Select language for OSD (5 languages).
Reset the screen to the Factory Preset
Display Settings.
LANGUAGE
RECALL
Adjust the vertical picture moire
cancellation.
V. MOIRE
Adjust the horizontal picture moire
cancellation.
H. MOIRE
ICON CONTROL FUNCTION
Normal range
H : 30 - 70 KHz
V : 50 - 160 Hz
Self Diagnosis
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks
if the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed
when the applied frequency is under
or over normal range.
FACTORY PRESET TIMINGS
Mode H.Freq (KHz) V.Freq(Hz) Remark
VGA 640
X 480 31.5 60 Non-interlaced
VESA VGA 75 640
X 480 37.5 75 Non-interlaced
VGA 720
X 400 31.5 70 Non-interlaced
VESA 46K 800
X 600 46.9 75 Non-interlaced
VESA SVGA 85 800
X 600 53.7 85 Non-interlaced
VESA 60K 1024
X 768 60.0 75 Non-interlaced
VESA 1024/85 1024
X 768 68.7 85 Non-interlaced
VESA 1280/60 1280
X 1024 64.0 60 Non-interlaced
Resolution
(dots
X lines)
*
This specification can be changed without any prior notice to improve
the quality of the product.
CDT Size 17-inch Flat
Diagonal visible image area 16.01-inch
Dot Pitch 0.24 mm
Synchronization Horizontal 30 - 70 KHz
Vertical 50 - 160 Hz
Plug and Play VESA DDC Compatible
Power Saving EPA, VESA DPMS, Nutek Compliant
Power Source 100-240 Vac, 50/60Hz (Free Voltage)
Power Consumption 85 W
Dimension-(set with stand) 404(W) x 394.8 (H) x 409.4(D) mm
Weight-unpacked 35.2/16 (lbs/Kg)
Operating Temperature 10 ~ 40°C /50 ~ 104°F