User's Manual

English-9
English - 8
CDT Size 15-inch
Diagonal visible image area 14-inch
Dot Pitch 0.28 mm
Synchronization Horizontal 30 - 54 KHz
Vertical 50 - 160 Hz
Plug and Play VESA DDC Compatible
Power Saving EPA, VESA DPMS, Nutek Compliant
Power Source 100-240 Vac, 50/60Hz (Free Voltage)
Power Consumption 70 W
Dimension-W x H x D 360 x 377 x 389 mm
(set with stand)
Weight-unpacked 25.4/11.5
(lbs/Kg)
Operating Temperature 10 ~ 40°C /50 ~ 104°F
SPECIFICATIONS
Self Diagnosis
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks
if the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when
the D-Sub signal connector is not
connected or the status of the monitor
is on DPMS mode.
Out of Range screen is displayed
when the applied frequency is under
or over normal range.
Normal range
H : 30 - 54 KHz
V : 50 - 160 Hz
ICON CONTROL FUNCTION
FACTORY PRESET TIMINGS
Mode H.Freq (KHz) V.Freq(Hz) Remark
VGA 640 X 480 31.5 60 Non-interlaced
VESA VGA 75 640
X 480 37.5 75 Non-interlaced
VGA 720
X 400 31.5 70 Non-interlaced
VESA 46K 800
X 600 46.9 75 Non-interlaced
VESA SVGA 85 800
X 600 53.7 85 Non-interlaced
VESA 48K 1024
X 768 48.3 60 Non-interlaced
Resolution
(dots
X lines)
*
This specification can be changed without any prior notice to improve the
quality of the product.
Adjust the width (horizontal size) of the
display.
H. SIZE
Adjust the position of the display
horizontally (left or right) .
H. CENTER
Adjust the position of the display
vertically (up or down).
V. CENTER
Adjust the height (vertical size) of the
display.
V. SIZE