User's Manual

PC Menu Adjustments

In the 6(783menu you may adjust the position of images displayed on screen once you connect an input signal from your 3&.

Recommended resolution is 1,980 x 1,080. For use with a laptop computer, refer to your computer’s owner manual on instruction for proper

display output. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional 3.5mm audio cable

for stereo sound. See page 14 for details.

How to Navigate:

After connecting to a 3&, press the VGA button on your remote control. Press the MENU button on the remote control and navigate using

arrow WX buttons to select 6(783. Gain access to position adjustment options by pressing the down T arrow button to highlight

$GYDQFHG, then press X arrow button to select from the following options.

+LJKOLJKW93RV Navigate

using the WX arrow but-

tons to adjust the position

of images displayed up and

down.

+LJKOLJKW&ORFN Navigate

using the WX arrow buttons

to control the width of the

image.

+LJKOLJKW+3RV Navigate

using the WX arrow but-

tons to adjust the position of

images displayed from side

to side.

+LJKOLJKW$XWR. Press the X

arrow button to automatically

adjust the display to the best

VHWWLQJ:KHQSURPSWHG

VHOHFW<HVWRFRQ¿UP

+LJKOLJKW3KDVH. Navigate

using the WX arrow buttons

to improve focus and image

stability.

:KHQSURPSWHG6HOHFW³<HV´WRFRQ¿UP

Setup Menu