Quick Guide

8
1. Open your browser, input the camera’s IP address 192.168.1.13 in the address
bar and then press Enter to open the login page.
2. Enter the username and password (admin/123456 by default) and then click
Login.
NOTE!
⚫ DHCP is enabled by default. If a DHCP server is deployed in the network, the IP
address of your camera may be assigned dynamically, and you need to use the
assigned IP address to log in.
⚫ If prompted, install the plug-in at your first login. Please follow the on-screen
instructions to complete the installation and then open the browser again to
log in.
⚫ The default password is intended only for your first login. To ensure security,
please change the password after your first login. You are strongly
recommended to set a strong password of at least nine characters including all
three elements: digits, letters and special characters.
⚫ If the password has been changed, please use the new password to log in.
7 APP
1. Scan the QR code below, download and install the app.
2. Follow the on-screen message to register an account and log in. Skip registration
if you already have an account.
3. Add the device in the app. To connect the device via Wi-Fi, you need to configure
device Wi-Fi first.