Quick Guide

6
WARNING!
⚫ Before you insert or remove the Micro SD card, be sure to disconnect power
and wait till the camera stops operation; otherwise, the camera or the Micro
SD card may be damaged.
⚫ Do not disassemble the device in high humidity environment. The high
humidity inside the device will cause lens fogging.
4.2 Wall Mount
1. Locate the positions of holes by pasting the drill template.
CAUTION!
Keep the line formed by the two holes on the template bottom horizontal.
Drill template
2. Drill holes according to the template.
3. Knock in the plastic anchors of self-tapping screws, and make sure that they are
tightened up.