Quick Guide
Table Of Contents
8
8.
Adjust the monitoring direction.
1
3
2
1
Adjust the opening of the
universal joints as required.
2
Rotate the spherical hinge of
the camera to get the desired
monitoring direction.
3
Tighten the locknut.
9.
Power on your camera and adjust images.
NOTE!
The preceding installation process is for concealed installation, during which holes
are punched on the wall and cables are penetrated into the wall. If open installation
is adopted, cables are not penetrated into the wall but threaded out from the outlet
on one side of the base.
1.
Open your Web browser, enter the camera's IP address in the address bar, and
then press Enter. The default IP is 192.168.1.13 (subnet mask is 255.255.255.0).
2.
In the login page, enter the default username and password (admin/123456), then
click Login.
5
Ac
c
e
ss
Yo
u
r
C
amer
a
A
n
ten
n
a
In
terface
A
n
ten
n
a
Reset