Quick Guide

4
 Contact professionals for maintenance information. Do not attempt to dismantle
the device by yourself. We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.
2.2 Maintenance
 If there is dust on the front glass surface, remove the dust gently using an oil-free
brush or a rubber dust blowing ball.
 If there is grease or a dust stain on the front glass surface, clean the glass surface
gently from the center outward using anti-static gloves or an oil-free cloth. If the
grease or the stain still remains, use anti-static gloves or an oil-free cloth dipped
with detergent and clean the glass surface gently until it is clean.
 Do not use organic solvents (such as benzene and alcohol) to clean the
transparent dome cover.
3.1 Dimensions
The following figure shows device dimensions. The appearance may vary with device
model.
3 Ap p e aranc e
90.10mm
62 .42 mm
39.00mm
162..45 mm
8.90 mm
31
.
00mm
39
..
00mm
62
.
67mm