Quick Guide

3
1 Packing List
Contact your local dealer if the package is damaged or incomplete. The package
contents may vary with device model.
No. Name Qty Unit
1 Camera 1 PCS
2
User manual
1
Set
3* Accessory pack 1 Set
2 Safety Instructions
Installation and removal of the unit and its accessories must be carried out by
qualified personnel. You must read all of the safety instructions before installation
and operation.
2.1 Precautions
 Use a power adapter or a PoE device that meets requirements. Otherwise, the
device may be damaged.
 Make sure the length of the power cable between the power adapter and the
camera is not too long, otherwise the voltage of the camera is lowered, causing
the camera to work abnormally. If it is required to lengthen the power cable,
lengthen the cable between the power adapter and the mains.
 Do not overbend the cables during the installation, otherwise, poor cable contact
may cause malfunction.
 When connecting to an external interface, use an existing connection terminal,
and ensure that the cable terminal (latch or clamp) is in good condition and
properly fastened. Ensure that the cable is not tense during mounting, with a
proper margin reserved to avoid poor port contact or loosening caused by shock
or shake.
 During transportation, special attention is required to protect the transparent
dome cover from friction, scratch and stain, etc. Do not remove the protective film
from the cover until mounting is finished. Remove the protective film before
powering on the device.