Quick Guide
Table Of Contents
2
Tighten
Tighten
Tighten
Tighten
Wrap the used cables separately
Waterproof tape
Wrap the unused cables
together into a bundle
3.
Install the supplied waterproof components to the network cable in sequence.
CAUTION!
You need to mount the rubber ring onto the network cable interface first.
4.
If your camera has a DC cable and you will not use it, insert the plug into the
interface.
5.
(Optional) After the waterproof treatment is completed, put the cables into a
waterproof junction box (purchased separately).
CAUTION!
Restore and fasten the device after dismounting.
Place the power adapter in a power distribution box.