Quick Guide

5
3.2 Cable Connection
The appearance and tail cable may vary with device model.
NOTE!
For specifications, see the latest product datasheet.
4 Mount Your Camera
4.1 (Optional) Insert Micro SD Card
To use the local storage function, you need to install a Micro SD card into the camera.
The SD card is installed inside the camera. To install the SD card, you need to remove
the back cover of the camera first. Do not hot plug the Micro SD card after it is
inserted. Otherwise the camera or the SD card might be damaged. Contact your
dealer for the recommended specifications of the Micro SD card.
∅129.0mm
(5.1")
S100.0mm
(3.9")
143.6mm
(5.7")
ø
108.5mm
(4.3")
3- 4.0mm
(0.16")
1/4-UNC-2B
ø
Third-party device
connected through
RS485 interface
ALM_OUT_P/ALM_OUT_N/ALM_INPUT/GND
Power adapter
IP
Network