Quick Guide
20
⚫ Make sure the power supply provides a stable voltage that meets the power requirements
of the device. Make sure the power supply's output power exceeds the total maximum
power of all the connected devices.
⚫ Verify that the device is properly installed before connecting it to power.
⚫ Do not remove the seal from the device body without consulting Uniview first. Do not
attempt to service the product yourself. Contact a trained professional for maintenance.
⚫ Always disconnect the device from power before attempting to move the device.
⚫ Take proper waterproof measures in accordance with requirements before using the device
outdoors.
Power Requirements
⚫ Installation and use of the device must be in strict accordance with your local electrical safety
regulations.
⚫ Use a UL certified power supply that meets LPS requirements if an adapter is used.
⚫ Use the recommended cordset (power cord) in accordance with the specified ratings.
⚫ Only use the power adapter supplied with your device.
⚫ Use a mains socket outlet with a protective earthing (grounding) connection.
⚫ Ground your device properly if the device is intended to be grounded.
Battery Use Caution
⚫ When battery is used, avoid:
➢ High or low extreme temperatures during use, storage and transportation;
➢ Extremely low air pressure, or low air pressure at high altitude.
➢ Battery replacement.
⚫ Use the battery properly. Improper use of the battery such as the following may cause risks
of fire, explosion or leakage of flammable liquid or gas.
➢ Replace battery with an incorrect type;
➢ Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;
⚫ Dispose the used battery according to your local regulations or the battery manufacturer's
instructions.
Avertissement de l’utilisation de la batterie
⚫ Lorsque utiliser la batterie, évitez:
➢ Températures extrêmement élevées ou basses pendant l’utilisation, le stockage et le
transport;
➢ Pression d’air extrêmement basse, ou pression d’air basse à haute altitude.
➢ Remplacement de la batterie.
⚫ Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles
mentionnées ici, peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz
inflammables.
➢ Remplacer la batterie par un type incorrect;
➢ Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper
la batterie;
⚫ Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du
fabricant de la batterie.
⚫ Personal safety warnings: