Quick Guide

6
3.3
Tools Preparations
•
Phillips screwdriver
•
Antistatic wrist strap or antistatic gloves
•
Drill
•
Tape measure
•
Marker
•
Plenty of silicone rubber
•
Silicone gun
3.4
Installation Steps
1. Determine the position of the 86*86mm
wall-mounted junction box.
T
his installation mode embeds an
86*86mm junction box in the wall in
advance or makes a hole on the wall to
embed the box.
NOTE!
There are two installation holes on the 86*86mm
wall-mounted junction box. They can be parallel
to the ground or vertical to the ground. They
need to map to intermediate holes on the bracket
during actual installation.
2. Determine the positions of holes on
the wall by referring to the positions
of four holes A on the installation
sticker.
Wall
Determine
the positions
of installation
holes on the
wall based
on the four
holes A.