Quick Guide

8
6. Fasten the access control terminal to the
bracket hook.
7. At the bottom of the device (dotted
box as shown in the figure below),
use the L-shape wrench to tighten
the two fastening screws clockwise.
4 Device Startup
After the device is installed correctly, connect one end of the power adapter
(purchased or prepared) to the mains supply and the other end to the power
interface of the face recognition access control terminal, and then start the device.
The display screen of the outdoor monitor is energized and lights up, and the live
view is displayed on the screen, indicating that the device is started successfully.