Quick Guide
Table Of Contents
- Safety and Compliance Information
- Regulatory Compliance
- FCC statements
- Battery Directive-2013/56/EC
- Default IP, Username and Password
- The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters).
- Packing List
- Appearance
- Mount Your Camera
- The preceding installation process is for concealed installation, during which holes are punched on the wall and cables are penetrated into the wall. If open installation is adopted, cables are not penetrated into the wall but threaded out from the outlet on one side of the base.
- Access Your Camera
7
Cable Connection
For specifications, see the latest product
datasheets.
Press and hold the RESET button for at least 15
seconds to restore factory default settings. Perform
this operation within 10 minutes after the device is
powered on or the reset will fail otherwise.
Mount Your Camera
(Optional) Insert the Micro SD Card
For cameras that support Micro SD, you need to insert the
Micro SD card after opening the bottom cover of camera. Do
not hot plug the Micro SD card after it is inserted. Otherwise
the camera or the SD card might be damaged.
IP Network
Network
interface
Power
interface