Quick Guide
Table Of Contents
- Safety and Compliance Information
- Regulatory Compliance
- FCC statements
- Battery Directive-2013/56/EC
- Default IP, Username and Password
- The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters).
- Packing List
- Appearance
- Mount Your Camera
- The preceding installation process is for concealed installation, during which holes are punched on the wall and cables are penetrated into the wall. If open installation is adopted, cables are not penetrated into the wall but threaded out from the outlet on one side of the base.
- Access Your Camera
9
3. Mount the plastic rivets
of self-tapping screws.
4. Screw the locknut to
loosen the universal
joint before attaching
your camera to the wall.
5. Mount your camera onto
the wall and connect all
cables.
6. Rotate the antenna to
the antenna interface
according to clockwise
direction.
Paste installation positioning
stickers on the wall and align
the cross center to the hole in
the wall.
Lead the cables across the hole
on the wall.
1
2
Use a Ø
6-6.
5mm drill bit
.
Drill
30 mm-depth guide
holes according to the
positions marked by stickers
.
1
2
Knock the plastic rivets
into the guide holes and
ensure that they are
tightened up.
Locknut