Quick Guide

7
Cable Connection
⚫ For specifications, see the latest product
datasheets.
⚫ Press and hold the RESET button for at least 15
seconds to restore factory default settings. Perform
this operation within 10 minutes after the device is
powered on or the reset will fail otherwise.
Mount Your Camera
(Optional) Insert the Micro SD Card
For cameras that support Micro SD, you need to insert the
Micro SD card after opening the bottom cover of camera. Do
not hot plug the Micro SD card after it is inserted. Otherwise
the camera or the SD card might be damaged.
IP Network
Network
interface
Power
interface