Quick Guide

10
7. Adjust the monitoring
direction.
8. Power on your camera
and adjust images.
The preceding installation process is for concealed
installation, during which holes are punched on the
wall and cables are penetrated into the wall. If open
Lead tapping screws through
the guide holes in the base
and fix them on the wall by
using a screwdriver.
Reset
Antenna InterfaceAntenna Interface
Antenna
Adjust the opening of the
universal joints as required.
Rotate the spherical hinge of
the camera to get the desired
monitoring direction.
Tighten the locknut.
1
2
3
1
2
3