User's Manual

II. PAIRING THE WIRELESS REMOTE

STEP 1：

Push in on bottom of remote to release battery cartridge and install three

AAA batteries into the remote battery compartment.Push in firmly to

close.

STEP 2：

 Plug the base into a power source and press the Pairing

Button/Program Button on the control box approximately in

1s,ensure the Pairing Lamp - White (Third) flashing.

STEP 3：

 Press “SW” until the backlight LED flashing ,release it and then

press “HEAD UP” ,never release until the backlight LED is lighting

all long,the remote is pairing and release it.

 W

hen the Pairing Button/Program Button on the control box and

the backlight LED on the remote stop flashing, and the buzzer on

the control box has a “DI” sound,pairing is completed.



If the function on the remote can not be operated,repeat the

pairing again.

Second,Press “BACK UP”,

never release until the backlight

LED is lighting all long and then

release.

First, Press “SW” button until the

backlight LED flashing and then

release.

Pairing Button/Program Button

Pairing Lamp - White (Third)