User's Manual

10. If you want to change the settings of individual Pulse Flex bulb or a group, press
‘Device Management’ under the Menu, then select the bulb or the group you
want to change.
‘Name’: Name of a Pulse Flex bulb or a Pulse Flex Group. This name is visible on the
App. User can press the ‘Edit’ button to change it to a more meaningful name, such
as “Bedroom”, etc.
‘Keep Last Brightness’: Record the last brightness value when the light bulb
physically turns off. Otherwise, the brightness will reset to the default value, which is
100%.
‘Relink’: If the bulb cannot be controlled via the App, press “Relink” to get it
connected back to the main network.
“Remove from the Network”: Removes the bulb from the network and restores to
the factory setting. This process may take several minutes, please wait and do not
turn the bulb off during this process.
11. If you want to add more Pulse Flex bulbs to the existing network, go to the
‘Device Management’ tab under the Menu and start setup wizard again.
12. More information about the how to this this product, software features and