User's Manual

on. Follow the voice prompt from the bulb, and wait for at least one minute to
restart Pulse Flex to the Wireless Mode (configurable, ).
CAUTION: Never use with external or outside dimmers.
4. Launch the Pulse Flex application. Please entre your Email account and password
to log in. If you don’t have an account before, please Sign Up to set up your new
account.
5. Pulse App will automatically search nearby Pulse Flex bulbs which have been
connected to your Wi-Fi router. If there are no Pulse Flex bulbs added to the
network, press “Device Management” to add unconnected Pulse Flex bulbs to
the Wi-Fi router.
6. Press ‘+’ button on the top right, the App will search out nearby configurable
Pulse Flex bulbs. Please note, this may take approximately 30 seconds, do not exit
the App during this process.
Notice: If there are still no Pulse Flex bulbs found, please check the Wi-Fi network
connection, light bulb switch, and distance between the Wi-Fi router and Pulse
Flex bulbs etc.
7. When the searching is complete, the App will list out all nearby configurable
Pulse Flex bulbs. You can select one Pulse Flex bulb at a time (only configure one
bulb per time), press “Next” and select your Wi-Fi router. Enter the password of
Wi-Fi router and wait for the connection complete. This process may takes
several minutes, please do not exit the App during this time.