User's Manual

4
FIG3.3.1
5. Add a new hub
 Devices interface ----- click the top-right “+”icon--click “Add a Hub” and
follow the guidance to connect the hub with your router .
 The setting steps are as below：
（1） Insure the hub is power on and connect to your router with an Ethernet
cable；（ FIG3.4.1）
（2） Click the next  make sure your phone’s WIFI connect to the same
router---click the next (as FIG3.4.2). enter the password of your
router.(as FIG3.4.3)
（3） After about 20 seconds, we will do this work and we can add bulbs now!
(as FIG3.4.4 and FIG3.4.5)