User's Manual

ZK201FAR User Manual
5.2 Installing ZK201FAR to the Scooter
Connect the 5-pin interface to the scooter, and then it will be powered on and can communicate with the scooter.
ZK201FAR can report the position and status of the scooter to the backend server and the backend sever can send
commands to ZK201FAR to transfer to scooter to control the behavior of the scooter also.
5.3 Communicating with Backend Server
After installing SIM card and powered on, ZK201FAR can communicate with the backend server through network,
and transfer reports of emergency, Geo‐fencing, device status and scheduled GPS position etc. It is easy for
service provider to set up their tracking platform based on the functional wireless tracking protocol.
5.4 Debugging
Users can use the 4-pin interface to give commands to the device locally for the purpose of testing and
debugging.
5.5 WARNING
Pay attention to any warnings.
⚫ Do not attempt to open or disassemble GPS Tracker.
⚫ Do not place GPS Tracker on or in heating devices, such as heaters, fire source etc.
⚫ Do not expose GPS Tracker to extreme temperatures. The recommended temperature ranges are from -20 to
60℃.
⚫ Do not place GPS Tracker close or dispose to fire. This may cause the device to explode.