ZK201FAR User Manual
ZK201FAR User Manual 1. Introduction ZK201FAR is a GPS positioning tracker specially designed for scooters based on LTE Cat4 network technology, combined with dual frequency and RTK positioning technology. Its built-in dual band GPS receiver has superior sensitivity, can receive signals in L1 and L2 frequency bands at the same time, provides centimeter level positioning accuracy, and has extremely fast first positioning time (TTFF).
ZK201FAR User Manual 3. Specifications 3.1 General Specifications Dimensions(L*W*H) 195*37*71(mm) External Battery Voltage 40V~60V Operating Temperature -20℃ ~ +60℃ 3.2 LTE Specifications No. Item 1 Antenna 2 Chip 3 Frequency 4 LTE Function 5 RF Output Power 6 Sensitivity 7 Transmission Mode Parameters Internal Antenna L506 FDD-LTE: B2/B4/B5/B12/B13 LTE:DL 150Mbps,UL 50Mbps LTE Cat4: 23dBm LTE-FDD:-92dBm TCP 3.3 GPS Specifications No.
ZK201FAR User Manual Hot Start: 3 s Assistance Start: 5 s GPS:L1C/A,L2C BDS:B1I,B2I 6 Receiving Mode GLONASS:L1OF,L2OF Galileo:E1-B/C,E5b [1] Location accuracy without RTK. 3.4 BLE Specifications No. Item Parameters 1 Antenna Internal Antenna 2 Chip Set nRF52810 3 Frequency 4 Bluetooth Version 5 Sensitivity 6 Max out RF Power 2.4GHz(BLE) BLE 5.0 -96dBm@1Mbps, -104dBm@125Kbps 2 dBm 3.6 Other Specifications No.
ZK201FAR User Manual 4. Interface Description 4.1 5-pin Connector Interface Pin No. Pin Name Description 1 GND 2 CANON Green, controlling signal output 3 CAN-H Blue, CAN-H 4 CAN-L Yellow, CAN-L 5 Voltage Black, ground wire Red, power input wire PIN No. Name Description 1 VBUS Red, 5V 2 DM Orange 3 DP Brown 4 GND Grey 5. User Instructions 5.1 Installing SIM Card 1. Turn off ZK201FAR. 2. Open ZK201FAR and insert SIM card in the red circle place.
ZK201FAR User Manual 5.2 Installing ZK201FAR to the Scooter Connect the 5-pin interface to the scooter, and then it will be powered on and can communicate with the scooter. ZK201FAR can report the position and status of the scooter to the backend server and the backend sever can send commands to ZK201FAR to transfer to scooter to control the behavior of the scooter also. 5.
ZK201FAR User Manual 5.6 RADIATION EXPOSURE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.