ZK201FAP User Manual
ZK201FAP User Manual 1. Introduction F9P-RTK module, integrated high-precision board (ZED-F9P) can simultaneously receive GPS, Beidou, GALILEO, GLONASS satellite system L1, L2 frequency points, combined with high-precision antenna integrated design, small size, light weight, fast Complete the realization of RTK base station assisted positioning function. 2. Product Overview 3. Specifications 3.
ZK201FAP User Manual 3.3 RTK module Specifications No. Item Parameters 1 Antenna Internal dual-band antenna 2 Module type RTK base station module Tracking & Navigation: -167dBm Recapture: -160dBm 3 Sensitivity Cold start: -148dBm Hot Start: -157dBm PVT[1] : 1.
ZK201FAP User Manual Frequency: 200Mhz RTK works fine, white flashes (flashing at 1000ms intervals); The communication of RTK F9P chip fails, and the red flashes quickly (flashing at 300ms interval); RTK fails to obtain position, red flashes slowly (flashing at 1000ms interval); 2 Status of LED Indicators RTK network connection fails, red and white flash alternately (flashing at 300ms intervals); RTK server connection failed, red and white flashing alternately (flashing at 1000ms interval). 4.
ZK201FAP User Manual 2 DM Data negative signal wire (orange) 3 DP Data positive signal wire (brown) 4 GND Ground wire (grey) 5. User Instructions 5.1 Debugging Users can use the 5-pin interface to give commands to the device locally for the purpose of testing and debugging. 5.2 WARNING Pay attention to any warnings. ⚫ Do not attempt to open or disassemble GPS Tracker. ⚫ Do not place GPS Tracker on or in heating devices, such as heaters, fire source etc.
