User's Manual
Table Of Contents
- 1. Introduction
- 2. Product Overview
- 3. Specifications
- 3.1 General Specifications
- 3.2 LTE Specifications
- 3.3 GPS Specifications
- 3.4 BLE Specifications
- 3.6 Other Specifications
- 4. Interface Description
- 4.1 Connector Interface
- 5. User Instructions
- 5.1 Installing SIM Card
- 5.2 Installing ZK200MGU to the RTK
- 5.3 Communicating with Backend Server
- 5.4 Debugging
- 5.5 Warning
- 5.6 Radiation Exposure Statement
- 5.5 CE Declaration
ZK200MGU User Manual
PIN No. Name Description
1 VBUS Red, 5V
2 DM Orange
3 DP Brown
4 GND Grey
5. User Instructions
5.1 Installing SIM Card
1. Turn off ZK200MGU
2. Open ZK200MGU and insert SIM card in the red circle place.
5.2 Installing ZK200MGU to the RTK
Connect the 5-pin interface to the RTK, and then it will be powered on and can communicate with the scooter.
ZK200MGU can report the position and status of the scooter to the backend server and the backend sever can
send commands to ZK200MGU to transfer to scooter to control the behavior of the scooter also.