User's Manual

above 4 km/h or 2.5mph.
6 Speed Unit Switching The speed unit of kilometer or mile is controlled by app via Bluetooth.
The speed unit can be changed by pressing the button 5 times.
7 Online upgrade
Controller firmware and instrument firmware can be upgraded through
Bluetooth.
8 Bluetooth control
command receiving
It can receive instructions sent by mobile phone/upper computer via
Bluetooth
, analyze them, and perform corresponding actions, such as
turning on and off vehicle locks and headlights
9 I
ssue of control
instruction
Relevant control instructions are sent t
hrough UART channel to control
the relevant actions of the controller.
10 E
rror Code Showing
and reporting
The meter can display error code reported by its own judgment and
controller, and report to the upward computer/APP via Bluetooth timing.
11 Timely
reporting of
real-
time vehicle
information
The instrument reports the real-time status information of the body, such
as current speed, VMT, total VMT, etc., through Bluetooth timing
up-position machine/APP
12
Vehicle configuration
information report
After receiving the instruction to read the vehicle configuration
information via Bluetooth
, the instrument will report the vehicle
configuration information via Bluetooth upward machine/APP.
13 Switch to start mode Switch the scooter to power-assisted or non-power-assisted startup mode
through Bluetooth command configuration;
14 E level implementation
mode
When the speed is greater than 3km, the motor can be started. The
maximum speed is 5km. It can only be started with help, not without help,
and the meter flashes at the same time.
15 On/off cruise mode
Configure the scooter to turn on or off the constant speed cruise mode by
Bluetooth command.
16 Switch to lock car mode Configure the scooter to open or close the lock mode through Bluetooth
command.