User's Manual

2.2 Other Parameters
No Item Parameters
1 MCU
Core: NRF52832 Flash
Memory:512 kB
Ram: 64 kB
Frequency: 2402~2480MHz
2 Timing Report Reportstatus at pre-set intervals
3 Audio Codec Buzzer
3.M
ETER FUNCTION DESCRIPTION
3.1 Operation Function
No Function Item Function Description
1 Headlight Control The headlights are turned on by default when the power is turned on.
The headlights are turned off when the power is turned off.
The headlights are
blinking when looking for the scooter, and the
headlights are automatically turned off when charging.
2 Speed Limit The speed limit mode is sent by the APP via Bluetooth to the meter, and
then the meter sets the controller.
The speed is limited under25 km/h.
3 Acceleration When the power is on, the assist sliding speed exceeds 4 km/h (2.5 mph).
When the handle is pressed, the system will control the rotation of the hub
according to the depth of the handle press.
The lighter the press, the slower the speed, the faster the press, the faster
the speed. The real-time speed is displayed in the first three words of the
meter.
4 Brake
The brake is electronic brake + drum brake. When the brake is pressed,
the system controls the output electromagnetic brake
and slows down
gradually until the hub is locked.
5 Kick Start The controller can drive the motor only when the speed of the kicking is