User's Manual

3 Acceleration When the power is on, the assist sliding speed exceeds 4 km/h (2.5 mph).
When the handle is pressed, the system will control the rotation of the hub
according to the depth of the handle press.
The lighter the press, the slower the speed, the faster the press, the faster
the speed. The real-time speed is displayed in the first three words of the
meter.
4 Brake The brake is electronic brake + drum brake. When the brake is pressed,
the system controls the output electromagnetic brake and slows down
gradually until the hub is locked.
5 Kick Start The controller can drive the motor only when the speed of the kicking is
above 4 km/h or 2.5mph.
6 Speed Unit Switching The speed unit of kilometer or mile is controlled by app via Bluetooth.
7 Online upgrade Controller firmware and instrument firmware can be upgraded through
Bluetooth.
8 Bluetoothcontrol
command receiving
It can receive instructions sent by mobile phone/upper computer via
Bluetooth, analyze them, and perform corresponding actions, such as
turning on and off vehicle locks and headlights
9 Issue of control
instruction
Relevant control instructions are sent through UART channel to control
the relevant actions of the controller.
10 Error Code Showing
and reporting
The meter can display error code reported by its own judgment and
controller, and report to the upward computer/APP via Bluetooth timing.
11 Timely reporting of
real-time vehicle
information
The instrument reports the real-time status information of the body, such
as current speed, VMT, total VMT, etc., through Bluetooth timing
up-position machine/APP