User's Manual

ManualsBrandsZhejiang Okai Vehicle ManualsElectronicsMETER

EB150 Meter User manual

1. GENERAL INFORMATION

1.1 Product Specifications

Type YB-EB150 ECU EB150 Controller

Standby Power ＜336mW Working Voltage 5

Dimension 66*39*22 (mm) Working Temperature -20℃~70℃

Head Lamps EB150B Head Lamp Acceleration Hall Acceleration

Brake electronic brake Hardware Version V0.1

Software Version b9 04 20210811 Waterproof IPX5

1.2 Harness Interface

Interface Terminal Specification

Headlamp White 3-core SMfemale; red,blue and black wire. Meter

Brake White 2-core male; red and black wire.

Acceleration White 3-core SMfemale; red,blue and black wire

Communication White 4-core SMfemale; red,green,blue,yellow and black

wire

Combination key White 4-core SMfemale; red,blue,yellow and black wire

Boot keys White 2-core male; red and black wire

Summary of content (7 pages)

PAGE 1
EB150 Meter User manual 1. GENERAL INFORMATION 1.1 Product Specifications Type YB-EB150 ECU EB150 Controller Standby Power ＜336mW Working Voltage 5V Dimension 66*39*22 (mm) Working Temperature -20℃~70℃ Head Lamps EB150B Head Lamp Acceleration Hall Acceleration Brake electronic brake Hardware Version V0.1 Software Version b9 04 20210811 Waterproof IPX5 1.2 Harness Interface Interface Terminal Specification Headlamp White 3-core SMfemale; red,blue and black wire.
PAGE 2
. TECHNIICAL PARAM METERS 2.1 BLEEParameters No I Item Parrameters 1 Antenna A Internnal Only 2 Chipset C NRF5 52832-QFAA A 3 Frequency F 2.4G: 2402MHz~2 2480MHz 4 Sensitivity S -90dB B 2.2 Other Parameters No 1 Item Parameters MCU Core: NRF52832 Flash Memory: 512 kB Ram: 64 kB Frequency: 2 Timing Report Reportstatus at pre-set intervals 3 Audio Codec Buzzer 3. METER FUNCTION DESCRIPTION 3.
PAGE 3
Acceleration When the power is on, the assist sliding speed exceeds 4 km/h (2.5 mph). When the handle is pressed, the system will control the rotation of the hub according to the depth of the handle press. The lighter the press, the slower the speed, the faster the press, the faster the speed. The real-time speed is displayed in the first three words of the meter. 4 Brake The brake is electronic brake + drum brake.
PAGE 4
12 Vehicle configuration information report After receiving the instruction to read the vehicle configuration information via Bluetooth, the instrument will report the vehicle configuration information via Bluetooth upward machine/APP. 13 Switch to start mode Switch the scooter to power-assisted or non-power-assisted startup mode through Bluetooth command configuration; 14 E level implementation When the speed is greater than 4km, the motor can be started. The mode maximum speed is 5km.
PAGE 5
3.2 Error reporting Function Error Code Error Item Reasons 01E Over current protection The current exceeds the limit.
PAGE 6
3.3 Display Function Powerbutton: Short press to turn on, long press for around 3s to turn off. Short press twice to switch among E level (pedestrian mode)/ L level (economical mode)/ H level (Sport mode) when power on. E level is pedestrian mode, the maximum speed is limited to 5 km/h, which is suitable for sidewalk implementation. L level is the economical mode, and the maximum speed is limited to 15 km/h. H level is sports mode, and the maximum speed is limited to 25 km/h.
PAGE 7
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.