CONTENT NAME OF THE MAIN PART 2 SAFETY INSTRUCTIONS 3 FUNCTION STRUCTURE OF REMOTE CONTROL 4 RIDE PROCESS 5 PREPARATION STAGE 5 ADJUSTMENT STAGE 5 RIDING STAGE 5 PARKING STAGE BATTERY & CHARGER 6 BATTERY 6 CHARGER 6 CHARGING INSTRUCTIONS 6 MAINTENANCE 7 LUBRICATE/CHECK 7 BATTERY 7 PLACE & DAILY CARE 7 SOLUTION TO THE GENERAL PROBLEMS 7 PRODUCT SPECIFICATIONS TABLE 8 QUALITY ASSURANCE SCOPE 9 1
NAME OF THE MAIN PART EB203A EB203B 1. Driven wheel components 5. Power switch 2. Anti-slip mat or slip-resistant paper 6.Controller components 3. Maple board 7.Skateboard charging port 4. Active wheel components 8.
SAFETY INSTRUCTIONS 1. This product is an adult electric skateboard that is intended for adults only (Electric is not a toy and can not be used by children under the age of 14). Don’t carry others at the same time. 2. Please wear a safety helmet and other safety shielding facilities. 3. Don’t ride your e-skateboard in an unsafe or illegal place. 4. Please practice first. Once your riding skills have been mastered, you can enjoy your e-skateboard. 5.
FUNCTION STRUCTURE OF REMOTE CONTROL Power on/off: Long press the button “A” for power on; long press the button “A” again for power off. Forward/Backward: Push the button ”C” ahead for forward ; Push the button ”C” aback for backward ; Signal indicator: After successful matching between remote control and e-skateboard, both remote control light indicator and e-skateboard light indicator is red .You can enjoy your Moovi e-skateboard now.
0.5 seconds) Battery indicator - e-skateboard: Press button A. One light is on that means e-skateboard have 25% power. One light indicator flashes that means e-skateboard have 12.5% power. For example: If power level is 62.5%~75%, the light indicator is “○●●●” , if e-skateboard power is less than 12.5%,the skateboard has a vibration and it’s light indicator is “○○○☉” .When voltage less than safety voltage, the e-skateboard will slow down. You should brake as soon as possible at this moment.
c. Adjust remote control status: According to remote control exploded view, before skating, you should transfer low gear, push ‘roller’ and check that the e-skateboard is working properly. START MOVING: a. Start skating: The user stand on the e-skateboard, foot in tandem. Push ’roller’ slowly and go forward at low speed (Pay attention to: through control body balance to keep e-skateboard direction),When you can skate very well, you can skate at high speed . PARKING STAGE a.
Other type of e-skateboards is also not suitable for charging with Moovi charger. If this results in damage to the battery or charger or other components, the user assumes the responsibility. BATTERY After purchasing the Moovi make sure to fully charge the battery before using it .If not used for a long time, please charge once every 3 months . Please charge in time after riding long time. Untimely charging for dead battery will shorten battery life, or even lead to invalid battery.
Remarks: Regular inspection is very important!!! BATTERY If not used for a long time, please charge the battery once every three months to maintain the full power capacity. PLACE AND DAILY CARE Please do not put the skateboard under the hot sun , in the rain or other serious damp places for a long time . Please keep the skateboard clean. SOLUTION TO THE GENERAL PROBLEMS CHECK LIST When the products have such problems, please refer to the following ways to solve. 1. The e-skateboard can not move forward.
Reason: The remote control or e-skateboard is not power on. Solution: Make sure both remote control and e-skateboard power button is on. 2. The electric skateboard can not move forward or remote control vibrates. The reason: The skateboard is low in power Solution: Charge the skateboard or remote control. 3. Brake failure or abnormal parameters The reason: Parameter lost. Solution: Contact your local dealer or the Moovi support team. 4． If problems consists, please contact the Moovi support.
MAX LOAD Canadian maple 150KG MAX SPEED PRODUCT PERFORMANCE 36KM/H (Loaded with 80KG) CLIMBING ABILITY 25° SINGLE 18-20km (5.2AH) ENDURANCE (wind,roads and temperatures are all affected) DISTANCE STANDARD 36V VOLTAGE BATTERY PARAMETER TYPE OF Li(Ni-Co-Mn)O2,18650 Steel sheel column BATTERY BATTERY 5.2AH CAPACITY MOTER TYPE RATED DC permanent magnet brushless motor OUTPUT 2X250W NO-LOAD 2000r/min POWER MOTOR MAX PARAMETER SPEED RATED VOLTAGE 36V RATED TORQUE 5 N.
GURANTEE If have following problems during warranty period , please contact the Moovi support : PARTS Motor Quality issues Warranty Service period content 1 year FOC 1 year FOC 1 year FOC 1 year FOC The motor can’t work under normal circumstances Control Failure under normal circumstances Battery unit The battery can’t be charged or discharged under normal circumstances charger The charger can’t be charged or discharged under normal circumstances Noted: Please follow the cor
7. Damage caused by driving e-skateboard on an unsuitable roads 8. Any other abnormal damage caused by improper usage 9. Body number and controller or battery number doesn’t match 1)This device may not cause harmful interference. 2)This device must accept any interference received, including interference that may cause undesired operation.
