User's Manual

第 5 页 共 9 页
Chapter 2 Instructions
2.1 Construction and installation instructions
As shown in the figure below, prepare several S1 type beacons according to the indoor space size of
the factory, and install them at an interval of 5m according to the serial number. Note that the serial
number in the drawing should correspond to the ID number (minor) of the beacon. In addition to the
products, there are two M6 * 25mm expansion pipes, two M4 * 25mm cross countersunk head screws
and two decorative caps in the packing box, which are convenient for users to install and fix.
2.2 APP instructions
This product is equipped with two parallel ER14505 energy batteries. The battery capacity can be
used continuously for more than 5 years. As shown in the figure below, users can download
brightbeacon app to configure the relevant parameters of S1 beacon. The configurable parameters
include device name, transmission power and broadcast interval. At the same time, users can directly
view the remaining battery power through the app.