User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Installation
- 2.1 Installation protection
- 2.2 Unpacking inspection
- 2.3 Installation of necessary equipment
- 2.4 Antenna installation
- 2.5 Gateway body installation
- 2.6 Power supply installation
- 2.7 Grounding cable installation
- 2.8 Antenna extension scheme
- 2.9 Interface waterproofing
- 2.10 Pole and wall mounting
- 2.12 Antenna replacement
- Noteļ¼Replacement step reference to 2.4 Antenna ins
- Chapter 3 Broadcast Compliance Instructions
- Chapter 4 Precautions
- Chapter 5 Troubleshooting
- Notice to Users
- Contact Information
20
IoT Interworking
Make Your Life Smart
Security Code
Figure 4 LoRa (omnidirectional fiberglass antenna) installation
(1). First install the lightning arrester at the antenna RF interface.
(2). Correspond the LoRa (omnidirectional fiberglass antenna) antenna and the lightning arrester to
the interface below the position marked with the LoRa word on the gateway shell, align and tighten.