User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Installation
- 2.1 Installation protection
- 2.2 Unpacking inspection
- 2.3 Installation of necessary equipment
- 2.4 Antenna installation
- 2.5 Gateway body installation
- 2.6 Power supply installation
- 2.7 Grounding cable installation
- 2.8 Antenna extension scheme
- 2.9 Interface waterproofing
- 2.10 Pole and wall mounting
- 2.12 Antenna replacement
- Noteļ¼Replacement step reference to 2.4 Antenna ins
- Chapter 3 Broadcast Compliance Instructions
- Chapter 4 Precautions
- Chapter 5 Troubleshooting
- Notice to Users
- Contact Information
20
IoT Interworking
Make Your Life Smart
Security Code
4. Wire brush
5. Clean and dry cloth
6. Antioxidant compounds
7. Electric drill with a suitable drill bit (wall mounted)
2.4 Antenna installation
2.4.1 GPS antenna installation
Figure 3 GPS antenna installation
As shown in Figure 4, the GPS antenna corresponds to the RF interface of the position marked with
the GPS word on the gateway shell, aligned and tightened.
Note: GPS antenna vertical gateway facing outward
2.4.2 LoRa (omnidirectional fiberglass) antenna installation