User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Installation
- 2.1 Installation protection
- 2.2 Unpacking inspection
- 2.3 Installation of necessary equipment
- 2.4 Antenna installation
- 2.5 Gateway body installation
- 2.6 Power supply installation
- 2.7 Grounding cable installation
- 2.8 Antenna extension scheme
- 2.9 Interface waterproofing
- 2.10 Pole and wall mounting
- 2.12 Antenna replacement
- Noteļ¼Replacement step reference to 2.4 Antenna ins
- Chapter 3 Broadcast Compliance Instructions
- Chapter 4 Precautions
- Chapter 5 Troubleshooting
- Notice to Users
- Contact Information
20
IoT Interworking
Make Your Life Smart
Security Code
2.4.3 Antenna installation completion sketch map
Figure 5 Antenna installation completion display
Note: For the RF part of antenna connected to the inside of the gateway, its installation needs to
pay attention to the external lightning protection. An antenna feed arrester should be installed between
the LoRa antenna and the gateway, and the antenna must be installed within the protection area of the
lightning rod.
2.5 Gateway body installation