Specifications

Leader in IOT Embedded Solution
Page 12 of 15
Regulatory Module Integration Instructions
2.2
List of applicable FCC rules
This device complies with part 15.247 of the FCC Rules.
2.3 Summarize the specific operational use conditions
This module can be used in Industrial remote sensing, telemetry communication
,Home wireless security alarm system. The input voltage to the module should be nominally 2.0~3.6
VDC ,typical value 3.3VDC and the ambient temperature of the module should not exceed 85℃.
This module using only one kind of antennas with maximum gain is 0.5dBi .Other antenna
arrangement is not covered by this certification.
The antenna is not field replaceable. If the antenna needs to be changed, the certification
should be re-applied.
2.4 Limited module procedures
Not applicable
2.5 Trace antenna designs
Not applicable
2.6 RF exposure considerations
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance
20cm between the radiator& your body. If the device built into a host as a portable usage,
the additional RF exposure evaluation may be required as specified by§ 2.1093.
2.7 Antennas
Module only contains one PCB antenna. No additional external connectors.
2.8 Label and compliance information
The outside of final products that contains this module device must display a label
referring to the enclosed module. This exterior label can use wording such as: “Contains
Transmitter Module FCC ID: 2AOFDLSD4RF043610D0 ”,or “Contains
FCC ID: 2AOFDLSD4RF043610D0 ”, Any similar wording that expresses the same
meaning may be used.