Specifications

Leader in IOT Embedded Solution

Page 10 of 15

6. Packing

6.1 Ways of Packing

■ Roll □ Foam □ ESD bag

Drawing 6-1 Roll Dimensional Drawing

Technical Requirements

Reference Size

Technical requirements

1. The accumulative error per 10 drive holes should be within±0.2;

2. The inner bending of 250MM shall not be higher than 1;

3. Loaded with the materials: black PS and thickness: 0.30±0.05;

4. Surface impedance ranges from 10

to 10

Ohm;

5. 23.5m per reel and packed in 13” plastic tray; the number of elements

accommodated:800 Pcs;

6. A0 and B0 shall be subject to the measurement made at the place 0.3mm away

from the lowest bottom inside the cavity, K0 is the inner depth and R angle

unmarked is 0.3;

7. The product complies with Standard EIA-481 ;

8. Product requirements comply with “ROHS”.