User's Manual

ManualsBrandsZhejiang Libiao Robotics ManualsRoboticsSorting Robot

User Manual of LBMini250 Sorting Robot

1. Brief Descriptions

LBMini250 sorting robot are mainly used for sorting in industries of express

delivery services and warehousing logistics. Operated on special sorting platforms,

these robots can receive and execute orders from servers to unload parcels and

transport them to designated locations.

Product pictures:

Summary of content (6 pages)

PAGE 1
User Manual of LBMini250 Sorting Robot 1. Brief Descriptions LBMini250 sorting robot are mainly used for sorting in industries of express delivery services and warehousing logistics. Operated on special sorting platforms, these robots can receive and execute orders from servers to unload parcels and transport them to designated locations.
PAGE 2
. Descriptions of Product Modules 2.1.BMSP module 2.1.1.BMSPmodule through the chassis module read RFID(13.56M) tags, get the current location information, robot and wireless module to the server, the server based on the current robot position and state issued work instructions, robot analytic server command, and control the servo device, such as complete instruction execution, so as to realize the robot control and turning control, version control, movement, finally realizes the whole working process. 2.
PAGE 3
2.6. Buttons and LED Indicator Lights Buttons are utilized for testing single robots and manually controlling shutdown. The LED indicator light is employed for indicating current state. The functions of buttons and the indicator lights are shown as follows: Operation State Standby Operation Shutdown Function SN The bright red LED indicator lights can indicate malfunctions.
PAGE 4
An Introduction to Functions of Buttons: No button will function when a robot is under the No.1 State shown on the above table. Current State No.
PAGE 5
through the LBAP-102LU wireless device of the switching device. Then, the robot can be automatically powered on. 3.2. Sorting Robot sorting can be realized through the server. You can control the robots and exchange data via wireless module with server software. The server will try connecting all robots which have been powered on.
PAGE 6
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.