Product Description
2
3. Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worse still-in contact with metal structures, which
could otherwise exert a signal shielding effect.
Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.
Instructions for use
The wireless keypad has two channels: “Channel 1” and “Channel 2”, you can choose one of them.
Channel 1: Channel 2:
Enter the password of channel 1, press <, (original password is “11”); Enter the password of channel 2, press >, (original password is “22”);
If the password is correct, send channel 1 coded signal and 1 long beep; If the password is correct, send channel 2 coded signals and 1 long beep;
If the password is incorrect, the buzzer will give 5 short beeps. If the password is incorrect, the buzzer will make 5 short beeps.
Note:
1. If you do not press > (or <) within 10 seconds after entering the password, the original input password is invalid, you need to re-enter the password, and
then press > (or <).
2. If the password is 027, the passwords similar to 27 and 0027 are not considered correct.
3. If the password is 0 (no password): directly press > (or <) to send the corresponding channel code.
4. If the number of digits entered is greater than 8 digits, it will be processed as an error password.
Change the password
Channel 1: The factory password is preset to: 11. Channel 2: The factory password is preset to: 22.
Step1: Press button”0” and hold it; Step1: Press button”0” and hold it;
Step2: Press button <, then release button <; Step2: Press button >, then release button >;
Step3: Release button”0”, enter password change state, Step3: Release button”0”, enter password change state, buzzer will send 1 long beep;
buzzer will send 1 long beep; Step4: Input original password, and press >;
Step4: Input original password, and press <; Step5: Enter a new password, such as 28111976 (no more than 8 digits), press >;
Step5: Enter a new password, such as 28111976 Step6: Enter the new password 28111976 again, then press >.
(no more than 8 digits), press <; The password is changed successfully, the buzzer emits 1 long beep.
Step6: Enter the new password 28111976 again, then press <.
The password is changed successfully, the buzzer emits 1 long beep.
Note:
1. If the new password exceeds 8 digits or the new password is inconsistent, the password change error will be displayed, the buzzer will make 5 short
beeps and exit the password change status.
2. In the password change status, if you do not enter the password, and you press the button > (or <) twice, the password is 0 digit, that means no
password, just press the button > (or <) to send the encoded signal.
Code matching
Channel 1: Channel 2:
Step1: Press the “learning button” on the gate opener control panel. Step1: Press the code button on the gate opener control panel.
Step2: Input the password of 1-8 digits, press <; Step2: Input the password of 1-8 digits, press >;
Step3: Input the password of 1-8 digits again, press <; Step3: Input the password of 1-8 digits again, press >;
Step4: The indicator on the control panel flashes, indicating successfully; Step4: The indicator on the control panel flashes, indicating successfully;
Step5: Re-enter the password of 1-8 digits, press < to confirm whether you Step5: Re-enter the password of 1-8 digits, press > to confirm whether
can control the gate opener. you can control the gate opener.
Reset the password
If you forget the correct password, please open the wireless keypad, and press the “RESET BUTTON”. Then the old correct password will be cleared
(Revert to factory password), you can set a new password followed manual.
Note:
1. Encoding definition, output encoding in standard HCS101 format, 28-digit serial number (with 57 limit);
2. The serial number will be randomly generated when the first use or when the password is reset to the factory value, you need to do the code matching
again;
3. The channel 1 and the channel 2 respectively have corresponding serial numbers and synchronization counters, that is to say, even if the passwords of
the two channels are the same, the corresponding serial numbers may be different. In this case, if two channels are used to control one control panel,
please matching code separately.