User's Manual

corresponding position. During this process, press any button that related to the actuator, the
moving action will be stopped. If press any button that not related to the actuator (such as
Under-bed lighting, massage), actuator will stop moving and begin to perform the button’s
function.
Under-bed lighting Buttons: Press the button to turn on/turn off the under-bed light. When the
light is in turn on state, if user didn’t press the button in 10 min, the light will turn off
automatically.
Massage Button: When the head/foot massage motors are turned off, press head or foot massage
button, the head or foot massage will begin to vibrate at the first vibration level. Once press the
massage button, the vibration level will increase one gear. When the vibration strength reaches the
third gear, the massage will turn off. It means, the massage operates with the round cycle
0-1-2-3-0.
Stop Button: Press the button to turn off the massage.
3.3 Dial switch:
The dial switch has three gears in total: left (gear A) - middle (gear AB) - right (gear B). When
learning, dial A or B to learn bed A or bed B respectively. When controlling, dial A to control bed
A, dial B to control bed B, and dial AB to control bed A and bed B at the same time.
3.4 Low power consumption function: when the button is pressed, the remote control starts to
work, and the backlight lights up. If the button is not pressed for more than ten seconds, the
remote control enters into low power consumption, and the backlight goes out.